RadioBOSS allows the user to enable a microphone at any moment during audio playback.

 

Note: If you have a hardware mixer board, you probably don't need the software MIC feature, as you may connect the microphone directly to the mixer.

 

To use the microphone:

 

First of all, check the MIC settings: microphone settings.

On the toolbar, click the Microphone button - or click the MIC button on the FX tab.

 

The microphone works as long as the button is pressed.

 

To disable the microphone, click the Microphone button again.

 

---

More information:

Microphone/Line-in